construction

Mountain House: The Best Choice for Nature Lovers

If the spectacular beauty of the majestic mountains moves and inspires you. If vast open skies fill you with contentment and awe, a mountain house is where you should live. Surely, there are a lot of people who don’t enjoy living in big cities where crowds and traffic is something that bothers people quite a bit. Nowhere else could you acquire such astounding experiences: The vibrant sunrises and the equally tranquil sunsets, the amazing sports you could enjoy with your company, the pleasures of food and drinks high above the land. You will discover how exciting life could be. However, this is something you need to see for yourself before you can experience it in the best possible way.

Mountain houses not only offer you spacious living, but they also offer added privacy. It makes perfect sense if you know that there’s no one nowhere near you and that you don’t have to face similar problems you would face if you live in the city. Instead, they have a distinct appeal where you could enjoy all seasons in their prime. Therefore, many people are eager to have an experience like this. However, building a mountain house could be intimidating. But thanks to The House Plan Shop, you have the opportunity to can check hundreds of mountain house plans available on the internet.

Here are some important elements that you should consider before building your mountain house to make the experience a rewarding one.

1. Analyze the cost of Construction

Source:millworksconstructionservices.com

Building a Mountain home could be expensive. For starters, you need to buy a lot to build the house on. Plus, chances are that the place where you will buy the material is not near you. Therefore, you will need to invest a significant amount of money to transport them to the location of your liking. You do not want to exhaust your resources on the foundations. For that, you have to plan an estimate for the foundations and the home itself.

Always keep a surplus, as once the construction gets started, there is still something that will be more than your estimation. Keep a budget for unexpected costs.

2. Site Selection

Source:pinterest

Do not proceed to pick out a location for just the view. You will need to consider many elements to make your mountain home as cost-effective as possible. You need to get professional help from an architect or an engineer even for selecting the site.

If you do not consider the topography, and there are a lot of trees or stones in the area, or a creek nearby, it does sound like heaven but increases your cost many folds.

Choose a considerably flat area, which could pass as a miniature plain. Next, you should carefully study the site that you choose. It would be wise to have a professional take a look. Getting professional advice is actually a smart investment. You can get an engineer to inspect the location and its surroundings.

3. Plan Exits

Source:goodfon.com

While you make your site plans, keep in mind that the weather in the mountains might get rough. You might be stuck indoors for days; therefore, you should set up more than one entrances and exits. Naturally, there are many different problems you can have due to the weather conditions. So, it wouldn’t hurt you to prepare yourself in the best possible way.

That way, you will have more than one option to resolve the problem that arises at some point. The access roads should be near your location for an easy commute. There should more than one road leading to the access roads from your house. This will come in handy if one gets caved in.

Make sure public utilities, like water, sewerage are attainable. You have to arrange for a well or a septic system for your sewerage.

4. Construction Design

Source:tahoerealestatediary.com

Construction designs for mountain houses are not as simple as an ordinary house. You have to consider the weather conditions in the mountains. So, you cannot rely on the same types of design that you can use if you live in different weather conditions. As you can presume, it requires a lot of research before you can make the ultimate decision about what you should do in these situations.

Your house should be anchored to the mountain. If you are building on a slope, consider the erosion level of the hill. You do not want your home sliding away in a few years. Professional mountain house designers and builders know how to forge a stable foundation.

5. Embody the Natural Beauty of the Mountains

Source:fropky.com

When designing your house plans, keep in mind to incorporate the natural charm of the mountains. Try to keep minimal damage to trees to disturb the genuine spirit of the mountains as minimal as possible.

Construct an outdoor relaxing space to enjoy the natural scenery. Think of every minute detail and plan well ahead to accomplish the house of your dreams. Your plans should be practical and within your budget.

6. Recruit an experienced local mountain building workforce

To carry out your plans as compassionately as you want to, invest in people who know what they are doing. It is better to find a local workforce familiar with the general problems in the area. Choose people who have a positive reputation as you would be working with them for a few months.

House building procedure in a nutshell

Follow the below-mentioned steps with the help of this personnel:

i)Get all necessary permits.

ii)Evacuate the area around your house

iii)Dig the foundations

iv)Construct house frame

v)Install woodwork

vi)Get plumbing and electrics done.

vii)Fix flooring

viii)Paint away

ix)Get it furnished

x)Get your house inspected by professionals for safety.

xi)Get a certificate of occupancy.

xii)Move into your new home.

Building a 12×16 Gable Shed from Scratch

Gable sheds are very popular and useful. It can be used as a storage for your tool, mower, and all things you do not have a place for, a workshop, garage, children’s favorite place, or even as a guesthouse! This way the guests will be comfortable as well, and your privacy will not be violated. It is possible to make it by your idea, which will take more time then you expected, or you can order a manual with all necessary information about the size of the shed, material you are going to need, and the size of every part required for the construction. Construction is simple and fast and you do not have to be a master of special skills to assemble it.

Before you start constructing, choose a shed of appropriate dimensions. If you have in plan to place it in your back yard, do the measurement to be sure it will fit. Do not worry if the shed you planned does not fit, with this plan we are sure you will be satisfied. Now when you have it, you can start with your work.

Source:pinterest

The first thing you should do is check if the land is appropriate for construction. By this we mean there are no landslides, there is no possibility of flooding, the soil is firm and can withstand the weight, and so on. Another important thing to do is to check with local authorities if it is allowed to construct the helping object of wanted size, or it demands certain permits.

Now when you know what kind of shed you exactly want, it is time to go for shopping. Make the shopping list with all material you are going to need for the floor, walls, door and window, roof shape, nails, and tools you are going to need.

The first step in constructing an object is a foundation. Having in mind it is a base of a shed, it has to be strong and capable to stand the weight pressure. We all know that concrete is strong, but wood is also solid and from an ecological point of view better solution, both for the environment and for health. Another advantage is the wood is warmer material. Unlike concrete, the wood as a foundation is faster to set up, you don’t have to wait a couple of days for it to dry. Clean the surface planned for placing the shed from the grass and start with constructing the frame of the foundation first. Keep in mind it has to be firm and strong enough to support the whole object. After you finish with the frame, the next step is flooring.

Source:bylerbarns.com

After foundation and flooring, erecting walls is the next step. Start with the front and the back-wall frame first, after which it is necessary to fasten the interior with wedges. After setting the front and the back wall, it is time for sidewalls. This should be easy, especially because you already have two walls, and on one of two remains, there is a window. It is your personal decision on what side of the shed you will set the window. When we talk about walls, always start with the frame. The lumber has to be cut according to specifications and try to be as precise as possible while doing it. After erecting the walls, the support can be removed. Having in mind this material is heavy, it is recommendable to lift the wall with the support of friends. Doors and windows come at the end. No matter if you want wooden or PVC joinery, rolling garage doors, or simply the wooden, it will perfectly fit. To better and natural appearance, the recommendation is always wooden.

The next step is the roof and after that, your shed is roughly finished. This is the part which will take the most time to be done. The reason for this is that several rafters have to be made according to the specification. This means that timber for the roof construction has to be carefully measured to fit perfectly to the rest of the shed. After gussets are added, adding shingles can start. use OSB sheathing to prepare the roof for shingles. Any kind of shingles can be set, but our choice is asphalted. Be careful during positioning the shingles and pay attention on the manufacturer’s instructions.

The reason why we recommend asphalt shingles because asphalt is an extremely durable material and shingles are easy to replace after years and years of usage. Its lifespan is approximately 15 years, and OSB sheathing is compatible with it. After we finished it, trims have to be installed to the roof to protect it from water leaking. For the final touch, fascia boards and soffits have to be installed.

What is the positive side of building a shed?

  1. It is cheap – if you ask an architect to make a project for you, it will cost you like the material for the whole shed or even more! This way, when you have a plan with the list and measures of all needed material, it is completely reliable and easy.
  2. Your shed will be finished in a week or less.
  3. Instructions are very easy to understand
  4. The material used for the construction is environmentally friendly and will perfectly fit in every yard
Source:homesteadsupplier.com

Your shed is roughly finished, it is naked in appearance. Now leave everything to your imagination. Imagine that you are a painter and that the interior of the shed is a clean canvas. Find the right color for your shed to look better, but also to protect the wood from insects and wood drying which can cause damages and ruin the overall look of this beautiful handmade construction. Think about installing the electricity in it, especially if you have in mind a workshop. Anyway, you are going to need it, at least for the light. If you want to partition one part and make an extra room, this is also possible with the help of plasterboard.

A Guide to Develop A DIY Garage Shed

A Garage shed is an important investment in a house.  The basic purpose behind installing a garage is to protect the parking place and the parked vehicles by withstanding rain, snow, heat, cold, and sun. The garage roofing styles are available in various types to suit the individual requirement of homes.

When a little creativity is added to this simple structure, it can become functional and aesthetically pleasing to the eye. If you are planning to build a standalone garage, you will find this article to be useful. Here we are going to share with you some easy and effective “Do It Yourself” tips to build your Garage shed.

If you are looking to build a roofed shed, then 3dshedplans.com is one of the best online places to visit to enrich your knowledge on shed plans. This company has perfected the art of building sheds, and provides you step by step Do It Yourself plans to develop strong and appealing designs.

Important Things to Consider Before Building A Garage Shed

Source:pinterest

To build a garage shed, you would need several types of permissions and a good amount of planning. It is required to plan your project as per the specified norms of the local government as prevalent in your state. Once you have carried out the preliminary checks, you should now find the best space to construct the garage shed.

There are a variety of materials that can be used to develop an external garage. These are metals, wood, clay, and vinyl tiles. The material selection is based on your preference of how robust, resistant, and attractive you want your shed to become. Taking an expert opinion can help in constructing an aesthetic and durable shed for your garage.

Define Your Garage Shed

Start the construction task by determining the dimensions and partitions of the shed. It is important to prepare a decisive plan before putting anything into action. Space is an important consideration at the time of the planning stage. The size of the structure should be greater than the vehicle size. A large sized garage can be used for multiple objectives.

Determine the most appropriate material to fit your shed’s requirement

There are various types of DIY materials available such as plastic, timber, and steel to develop your project. Plastic sheds need low maintenance, but they fade with passing time. Timber is susceptible to getting decayed, but it lasts for a longer time when treated the right way.

Steel is low in cost and highly durable. Garages built plastic as well as steel are immune towards the infestation of pests, and rotting. You must go for the materials that require less maintenance.

Every material has its share of pros and cons. Plastic ones are cheap and easy to maintain but lose their charm after some years. Wood has its traditional charm. It is expensive and convenient to build but susceptible to termites. Steel is the ideal choice due to its durability, affordability, and very little maintenance.

Determine the appropriate location

The selection of location to install it is a very important decision that you need to make when designing a DIY shed. This decision depends on the kind of shed that you wish to build.

To construct a garden shed, you need to choose the right spot on your garden for its construction. A garage shed is built at the place where the garage is located. This place is closer to road access. A retreat house is developed close to places that give a spectacular view, and can accommodate a bigger crowd.

Clean the Site

Now that the preparation phase is over, we will now move to the actual process of building garage sheds. It is necessary to properly clean the site before performing the construction. Perform pest control on the location before you begin the construction work.

Build A Robust Foundation

If you want your project to last for a long time, then you need to build a stronger foundation. Make sure the materials you chose are not prone to corrosion. Do not construct the foundation on wet and low-lying regions, as rainwater can accumulate and deteriorate the structure.

Hire A Good Carpenter

Source:worthview.com

Hire an expert carpenter to slice perfectly sized frames. He will create artistically sliced and shaped frames, and design the roof as per the visualization. They will also adjust the height of the wall as needed.

Choose Concrete Flooring

You need to value durable flooring, which lasts for a longer time and is cost-effective. It should provide more strength to the existing structure.

Construct A Garage Shed Roof with Trusses

When you construct it with trusses, it makes it affordable and easier to install. Ensure that there is a truss at every two feet distance.

Install Wooden Barn Sash Windows

Source:barntoolbox.com

A barn sash window is ideal for roofed extensions. It offers a robust frame to hold the glass and sash together.

Get Weatherproof Walls and Roof

Ensure that the roof and walls are weatherproof to stand undamaged, even in extreme weather conditions, such as heavy rain and snowfall.

Add Overhangs to Protect It from Siding

The addition of overhangs safeguards the entire structure and enhances its lifespan. It provides more durability and strength to the structure, and safeguards it from adverse weather conditions.

Use Customized Steel Roof Panels

Source:spenglerindustries.com

Invest in steel roof panels from a reliable vendor to make your roof sturdy and efficient. You can choose from a variety of color panel options.

Give Adequate Time For Construction

A Shed is a long-lasting investment that serves for many years. So, it is necessary to develop a strong one to get its uninterrupted benefits for many years. Do a lot of planning and lay a solid foundation to ensure durability.

Large doors, proper ventilation, the right selection of branded material, heightened safety, and involvement of experts is needed to build the best construction.

Conclusion

Garage shed offers you a secure place to park your vehicles. Irrespective of the type that you are developing, you can use these tips, to easily build an appealing and sturdy garage shed all by yourself.

How to Control Dust on A Work Site

Is it possible to stay clean on a construction site? Of course, it isn’t, whether you are a work manager or one of the workers. One of the main reasons why your suit will always get dirty while staying on a construction site is dust. This occurs in all situations, whether small or large projects. So, it can be said that dirt and dust are an indispensable part of construction work.
However, apart from a dirty suit, dust can cause much bigger problems. For example, if it is windy, it will cause the dust to move through the air. The consequences of this flow can be different. Some of the problems are health problems, the risk of damage to equipment, but also the risk of damage to electronics. We believe that no one wants this to happen because it will cause additional costs, or even injury to workers, which is certainly not the goal. Therefore, it is necessary to plan an effective dust suppression strategy. We have decided to discuss this topic below and provide you with some of the most common solutions to this problem. Well, if you’re ready, let’s get started.

1. Vegetation and Mulch

Image source: australiahqj.com

One of the most common and best solutions for dust suppression on a worksite is to use mulch and vegetation. Apart from the fact that this method is very effective, we must emphasize that it is also very simple. So, all you have to do is set the mulch properly and that’s all. Of course, you can combine mulch with vegetation to get even better results. In this case, you need to irrigate the grass at an early stage. It won’t be necessary later.
The principle is pretty simple. Mulch covers land that has become loose due to construction work. This means that even strong winds won’t be able to cause problems and that dust will remain in place. With the addition of vegetation, protection will be even better and more effective. The grassroots consolidate the soil so that there is no chance that wind and dust will cause problems.

2. Barriers and Fencing

Another fairly effective way of fighting dust in a construction site is to set up barriers and fencing. While it may not help to completely suppress dust, fences or other barriers are certainly a good way to partially reduce and retain dust. It is also very important to emphasize that most states have regulated laws when it comes to protective fences and barriers. Therefore, it is mandatory protection on construction sites.
According to research conducted by the Wisconsin Department of Natural Resources, fences need to be installed at right angles to the wind direction. You select the side where the wind is dominant, and then install protective fencing. Pay particular attention to the gaps between the barriers. There are different types (burlap, solid board, crate walls, hay bales, etc.), so it is important to fit barriers as good as possible so that there is no too much space between.

3. Water

Image source: tpitexas.com

Water is also one of the great things for dust suppression. However, if you use it, you have to be careful because too much water can be bad. As we have mentioned many times before, windy weather is a major cause of dust problems. Therefore, the dust should be kept in place. You can use water for this purpose. The principle is simple and you probably know it if you’ve ever played tennis on a clay court or at least watched a match on such type of court. So, you probably noticed that tennis volunteers regularly wet the court with water so that the wind doesn’t lift the dust off the surface. The same is the case with construction site dust. However, this is not a long-term solution, as the ground will dry out at some point. On the other hand, water is cheap, so that is an advantage.

4. Polymers

When it comes to more modern methods of dust suppression, the use of polymers is definitely the leading way. This method is very effective, however, if heavy vehicles are used on the construction site, then the effect won’t be too long. The application of polymers is usually done in two stages and involves the use of the aforementioned water. One of the most common polymers used for this purpose is polyvinyl acrylic. The first phase involves the application of a dry polymer, while in the second phase, it is moistened with water to cause fastening and to keep the dust in place.
In this way, a kind of seal is created on the surface of the soil, so that the dust problem is solved in a very efficient way. Still, as we said, heavy vehicles can easily break down the structure and re-create dust. You can read more about this method on the official website of SprayGrassAustralia, which deals with various methods of dust suppression, especially polymers.

5. Tackifiers

Image source: australiahqj.com

The last commonly used method involves the use of chemical compounds called tackifiers. These are in some ways adhesives that help to create a firm bond and seal on the surface. The most common color of tackifiers is green and there is a good chance that you have already seen how these compounds work. Another major area of application is road construction sites.
There are two ways to implement them. Tackifiers can be used on their own without any additives. This is a good way, however, if you want to amplify the effect, then mulch and seed additives are most often added. We explained the seeds and mulch effects earlier in the first method.

Conclusion

If you have read carefully so far, then you have concluded that different methods of dust suppression are used on construction sites. Some are cheaper, others more expensive, more efficient or less efficient. However, it is very important for the construction site to have as little dust and dirt in the air as possible, as it can cause health problems for workers, and can also cause damage to equipment (electronic above all).

Qualify for a Construction Business Loan with These 5 Simple Tips

What keeps your construction business going? Many contractors would say clients and projects, while others claim it’s marketing and advertising. But acquiring more clients and projects and implementing marketing and advertising won’t be possible without working capital. Working capital is the lifeblood that pumps your entire operations – from generating clients to closing a deal. Construction business loans can inject working capital where you need it the most. Click here to know more about the most popular construction Business loan programs for your company.

Applying for Construction Business Loans

Image source: liberty.financial

The speed and convenience of your construction business loan application depend on two factors: (1) the type of loan and (2) the type of lender you’re working with. Many contractors seek help from loan advisors to determine which type of loan program is best for them. Keep in mind that the required documents vary depending on the said two factors. However, expect to be asked for the following documents:

  • Financial Statements
  • Business Plans
  • Personal and/or Business Documents
  • Estimate/Costs of Your Construction Project

Traditional lenders often take a few weeks to assess your loan application, especially because lenders consider commercial construction risky. While requirements vary from lender to lender, it’s best to prepare all the documents related to your construction projects like designs, engineering specs, designs, and more.

For a more lenient and convenient application process, you might want to alternative lenders. Alternative lenders can fund your business within 24 hours and the entire online application takes no more than five minutes. The only downside is that loans from alternative lenders cost more than bank loans, but the convenience and speed of funding make up for it.

5 Tips to Qualify for Construction Business Loans

Image source: pinterest.com

Applying for construction business loans shouldn’t be a headache. To increase your chances for approval, here are five tips you should know about.

1.   Plan It Out

Taking out a loan for your construction project is a huge decision. For this reason, it’s important to thoroughly plan for it. There are multiple factors you need to consider before getting started, such as unforeseen costs, estimated costs of the entire project, and other types of expenses you need to fund. Be sure to take these factors into consideration before applying for a loan. Lenders would want to know how you plan to use the funds. For more details about loan requirements, don’t hesitate to contact SMB Compass.

2. Transparency is Important

It’s important to be transparent with your lender. Make sure all your documents are accurate, up-to-date, and readily available for perusal. Before submitting, review your application and your documents to ensure that you’re putting your best foot forward. Furthermore, lenders prefer businesses that have their finances audited by accountants or a third-party company. If you’re going to use the loan to purchase equipment, make sure to indicate the type of machines you want to buy and explain how each machine can benefit your business.

3. Check Your Credit History

Image source: thebalance.com

Generally, lenders want to fund a growing business instead of helping business owners pay existing debt. For this reason, most lenders evaluate your personal and business credit when applying for a loan to ensure you have a good credit rating. If you don’t know your current credit score, make sure to get a free credit report from Experian or Equifax.

4. Ensure You Can Meet Minimum Qualifications

Applying for a loan you can’t qualify for in the first place is a total waste of time. Lenders have minimum qualifications for approving a business loan. However, most lenders only approve companies that surpass their minimum requirements. To avoid wasting time and money, only apply for loans you’re sure you can qualify for, and see if you exceed the requirement. If not, work on improving your credit profile or cash flow before applying.

5. Don’t Ask for More than What You Need

Image source: pbs.org

If you ask for more than what you need, you can expect to spend more money on interest payments. Contractors need to limit their expenses in between projects to maximize profits, so the last thing you want to do is to spend money on unnecessary costs. Additionally, asking for more can lower your chances of securing a construction business loan. As mentioned, most lenders want to know what you want to do with the money. If they think you’re asking too much, lenders might lose faith in your capacity to manage your construction projects. Check out these tips from on how to effectively manage cash flow for construction projects.

The Lakhta Center Tower: Now Europe’s Tallest Skyscraper

As of 2019, St. Petersburg now has the distinction of being the site of the tallest skyscraper in all of Europe. The Lakhta Center Tower, an 87-story headquarters for Russia’s Gazprom, is not only the tallest building in Europe but has become more expensive to construct than the Burj Khalifa in Dubai. This 1,516-foot tower is also the northernmost skyscraper in the world and boasts the fastest elevators in Russia.

Cost of Construction

This soaring skyscraper cost 1.77 billion dollars to construct with 3,000 workers involves in everything from design to construction. The construction involved created five wings and 89 non-repeating levels, which necessitated the used of 3D modeling and Building Information Modeling software.

According to Redshift, a publication by Autodesk, the Lakhta Center design was inspired by the spires and domes of St. Petersburg with Gorproject chief architect Philipp Nikandrov in charge of architectural design. Parametric modeling was used to optimize the panelization of the façade to increase the use of standard 118 square foot panels to reduce installation errors and minimize costs.

Large Problems During Construction

Img source: YouTube

The project description sums up some of the most substantial challenges associated with the project. One of the most complicated issues “related to the erection of the complex appeared to be the wind.

At elevations it is much stronger than the ground wind: the builders recorded wind blasts from 120 to 140 km/hour, which is the highest wind strength level according to the Beaufort scale.” The most complicated problem was developing an anti-icing system that required two series of trials in Canada and Russia.

The Pursuit of Ultimate Sustainability

As Gazprom is a global energy company, one of the priorities was to create a headquarters that met and exceeded LEED standards for sustainability. The criteria, including water savings, energy efficiency, and recycling, which would ultimately lead to earning Platinum certification.

Some of the ways this was done were through using infrared radiators instead of traditional heaters and channeling excess heat from equipment into the building for use. A pneumatic vacuum waste-disposal system and computerized LED lighting systems were also implemented.

Ensuring Safety and Structural Strength

Img source: CNN.com

With a building so tall, ensuring that is structurally sound and safe is a huge endeavor. Gorproject CEO Sergey Lakhman, Ph.D., explains that 3D models were used to simulate potential scenarios. Composite steel-concrete columns with five times the strength of traditional columns were used that took up less floor space.

The foundation was created using 264 piles which were driven over 900 feet into the ground along with over 9,500 tons of metal reinforcement places in grids. Perimeter columns were added as stabilization to prevent disaster even at wind speeds of 85 miles an hour. There is also an advanced monitoring system consisting of more than 3,000 sensors installed within the building.

Everything about this building needs to be maintained in new ways which meant coming up with entirely new concepts to make things work. Lakhman noted, “When you undertake such an ambitious task that no one has ever solved before, you stop reflecting about your life being in vain. That’s why we in Gorproject try to create objects that can become part of life and make us really alive all the time.”

The Use of Adhesives in Construction as a Bonding and Sealing System

The use of adhesive materials as a bonding and sealing system is experiencing a great boom and huge growth in the areas of construction, manufacturing, and maintenance due to the several advantages that this kind of material provided. Without their use, it would be impossible to manufacture materials or products necessary in our daily life. For example, sandwich or honeycomb panels used in multiple sectors, which provide an extraordinary resistance combined with a very reduced weight; medical material such as bandages or band-aids; office material such as post-it, decorative materials such as vinyl and stickers, and so on.

For this reason, a wide range of sectors and industries use bonding materials as part of their processes, including the building sector. Companies like Harwal offer a different kind of adhesives designed to be used in the construction of complex structures such as skyscrapers, airplanes, locomotives or buses. The aeronautical industry was the first sector that promoted their use in construction processes to build airplanes, rockets or helicopters, due to its extraordinary advantages over traditional methods such as welding or screwing. Later on, other industrial sectors began to use adhesives as a bonding material to improve their products.

Img source: en.wikipedia.org

Choosing the best adhesive for a specific application can be complex. There are many variables to consider and numerous types of chemicals with different capacities. Understanding the following parameters will help reduce the options, and selecting the right adhesive will reduce the number of products to be coated. Here’s the essential information you need before you know which one to use.

How to choose the best adhesive

Adhesives work by attaching to the top surface of the bonded parts, so it is important to know the material and the exact conditions of those surfaces. For metals, will the adhesive be applied to the bare metal, or will there be paint or coating on the surface? For plastics, what base resin to use? Could there be residual release agents on the surfaces used? The different chemical compositions, on the other hand, provide unique advantages. Depending on the requirements in terms of mechanical strength, durability or flexibility some chemicals may be more suitable than others.

The binding chosen must have to last enough time open to allow proper mixing, application, and assembly of the bonded parts. Smaller assemblies or shorter cycle production processes may use a faster curing adhesive with a useful life of only five minutes or less, while larger assemblies which require alignment and fastening will probably need an adhesive wich EOL is longer than 20 minutes or more.

Types of adhesives used in construction

Img source: proconstructionguide.com

Resins

Resins provide a unique combination of elasticity and resistance. This versatility is ideal for numerous lightweight applications since they are perfect to fill gaps, they offer greater design freedom, high resistance to impact and they prevent crack propagation. Resins also withstand high dynamic loads and have excellent chemical and aging resistance.

Acrylic

Acrylics are usually monomers based on methacrylate ester or acrylic base. They are organic, synthetic, polymerization reagents. Acrylics can be single-component or two-component. They are capable of bonding a wide variety of materials. They have good thermal resistance and provide high tenacity joints.

Epoxy

Epoxy show excellent adhesion properties on almost all industrial materials, which allows for extensive freedom in design and cost optimization in manufacturing processes.  They provide greater resistance to impact and fatigue and are therefore better adapted to dynamic efforts. They have long term durability, higher resistance to friction and much greater resistance to shocks, vibrations, and impact.

Hot melt adhesives

Hot melt adhesives allow the user to harden and soften them whenever they want, using cold or heat. They feature an excellent bonding quality and once heated can bond really fast to materials.

Tape and contact sprays

Img source: sparefoot.com

Adhesive tape is perfect to work with glass, while contact sprays –which are waterproof and don’t leave stains can be used on uneven and porous surfaces.

How to apply adhesives in construction?

The use of adhesives in building processes generally requires clean, dry surfaces to increase bond strength. This typically means light abrasion and solvent, chemical cleaning of the Surface prior to the application. It is also advisable also to run adhesion tests to determine the appropriate surface preparation for a specific application. Once the surface is clean and ready, follow the manufacturer’s instruction, since every kind of adhesive has to be applied differently. They are available in many forms, including low-viscosity liquids and thixotropic pastes; one- and two-component formulations, with short and long working times; and various container sizes and shapes. Most of them are available in both container and cartridge systems, to make them more convenient and easy to use.

The incredible design of Lego Hoonicorn Mustang

/

When Ken Block, a guy who is Head Hoonigan In Charge, posted a photo on Facebook depicting a car, i.e. Hoonicorn Mustang, people were amazed. The thing for admiration is the fact that this car has been completely made of Lego parts. The ultimate good thing about this one particular is the fact that people can actually construct this by themselves and that they can even drive it.

Lachlan Cameron

Lachlan Cameron is actually the main person who stood behind the entire project and who actually provided the specifics of it and intrigued people around the world, especially, Lego fanatics. He pointed out that the latest creation was made entirely out of Lego parts and there have not been any custom parts used. On the other hand, it has been noticed that there are some chromed pieces used. We should also mention that the unit can be controlled by radio and that it also has radio controls.

Img source: maxim.com

Design

The creation has been made in such a way that it can run by the usage of various motors. It should be also noted that Cameron spent quite a bit of time in making a suspension setup that would also have both front and rear differentials. On top of this, the gear shift is moveable. A lot of attention has been paid to design in terms that we have not only the doors which pen, but the hood also opens as well. There is a V8 engine under the hood and it has moving pistons. We have only one remark: the tire could have been better.

Img source: motor1.com

Photos

We have only been able to see the photos of the constructed car, but most details can be found on Rebrickable.com which is the site of the creators of this car. It is worth mentioning that Cameron has been making a car out of Lego parts for three years and that he previously constructed a Mustang, he needed up to three months to finish it. Furthermore, he offers all the parts needed for the construction of Lego Hoonicorn Mustang.