cleaning

How to Stop Grass Buildup Under Any Lawn Mower Deck?

Behind every neat and well-cut lawn, there is a functional lawnmower. Any functional lawn mower cuts grass efficiently and evenly. For a lawnmower to function adequately, it has to be in good condition, and one of the issues that prevent that is the buildup of grass under the deck of the lawnmower.

The buildup of grass under a lawnmower deck is annoying. It leaves residues of grass clumps out on the lawn, makes the deck rusty, and because of reduced airflow, lawn mowing becomes a slow and untidy activity.

To stop this from occurring, users have to know how this buildup happens. A lubricant coating will reduce the grass buildup, but that does not eliminate the need for regular cleaning. If you have ever wondered how to stop grass buildup under any lawn mower deck, keep reading.

How the buildup occurs under the deck?

The buildup of grass under the deck is not because your lawn has been hexed or because your grass is rebelling. This buildup occurs as a result of a couple of reasons like:

  • Wet grass

Source: pixabay.com

Wet grass is much heavier than dry grass. When cutting it, the lawnmower engine cannot throw the clippings from the grass as far back into the bag as possible. Due to this, some of these cuttings stick to the underside of the lawn mower’s deck.

This causes clogging and prevents the grass bag from getting filled. If you are experiencing this problem frequently in your rainy area/terrain, this post can help you.

  • Tall Grass

Source: hgtv.com

Another cause of grass buildup under decks is the cutting height of the lawnmower. The right height of grass to cut off is a third (⅓) of the grass height. If the cutting height is set too low, more grass is cut, and this leads to an accumulation of more cuttings. You can solve it by raising the deck higher.

Cleaning out your deck underside

Now, this accumulation has occurred already. Before preventing a recurrence of this buildup, a cleanup has to be done. The underside of your lawnmower needs to be cleared of all grass clippings, clumps, and residue. Outlined below is a guide to help you.

  • Gain access to the underside of the deck

Source: barbieinablender.org

Before you begin, empty the gas/fuel tank of your lawnmower. Then tilt the mower, ensure that the fuel tank and engine oil fill opening are topsides, to avoid spills. Make sure the mower is securely propped up, to reduce the risk of falling over.

  • Disconnect the spark plug and detach the blade

The lawnmower engine can be turned on by rotating the cutting blades, and that is a severe hazard. It is best to disconnect the spark plug before handling the mower’s underside to avoid any accidents. Also, for extra safety, the blades should be detached.

  • Scrape off and blow off clogged-up grass

Source: bestforlives.com

While wearing industrial type hand gloves, large clumps of grass should be removed by hand or with a wide, flat pry bar. The remaining grass should be scraped off with a blunt metal knife or wire brush.

If the grass on the underside of the lawnmower deck is difficult to scrape off, water should be used to make it wet and pliant. An air hose with a nozzle should be used after the scraping to blow out the remnant loose grass.

  • Spray off with a pressure washer

If scraping does not get the job done, a pressure washer should be used to spray the lawnmower’s underside. This high powered spray will push out even very difficult dried clumps. After spraying, the mower should stay propped up till it dries completely.

  • Inspect the air filter

Source: lawnhabits.com

The air filter should be removed and inspected to find out if it needs repair or replacement. If its condition is good and can be washed, use an air hose to blow out accumulated grass clippings. You should do it carefully to avoid tearing the filter. Using a small amount of dish soap, water, and a soft cloth, or the air filter should be washed thoroughly and blown dry with an air hose. After it dries completely, you can reinstall it.

Ways to prevent a buildup from occurring

The buildup of grass clippings and debris clogged underneath the deck of a lawnmower is a domestic menace. This menace can be avoided if you do the following:

  • Apply a Spray Lubricant

Many people agree with this solution because it doesn’t only prevent those pesky clippings from sticking; it will also make it easier to clean the deck and prevent rusting. The deck should be dry before this lubricant is sprayed on.

  • Apply a Graphite Coating

Source: thespruce.com

This is another popular prevention method. This solution involves applying a coating of graphite to the underside of the deck. This application is just like painting the graphite liquid on. When you apply the graphite on the deck, the cleaning is easier and faster to do. It also requires a clean and dry deck before application. This article will show you how to apply the coating properly.

  • Only mow when the grass is dry

Grass, apart from being heavy, is sticky when cut. When wet, freshly cut grass turns into a thick paste that clumps and clogs easily, and this makes it easier for it to accumulate under the mower deck. In some cases and climes, this cannot be avoided. Thankfully the above measures exist and would help reduce the buildup.

  • Ensure that the clippings are short

Source: kiwicare.co.nz

The longer the grass clippings, the harder it is to blow them into the grass bag or away from the mower. The ideal length of grass to be cut is ⅓ of the height of the grass. Any more than this increases the number of clippings being accumulated under the deck and reduces the health of your grass.

In conclusion, this issue can be taken care of by cutting the grass regularly and keeping the lawnmower clean and dry. While under the deck needs to be cleaned periodically, not all models are built that way. So, ensure to check the user manual, remember to keep your mower parts dry and well-lubricated and stop thinking that this buildup is because you have the wrong type of grass.

3 Things to Consider Before You Buy a Blender

The market is filled with thousands of blenders of various sizes, types, and brands.

Just visiting a market and buying an attractive looking blender is so easy, but it might soon result in utmost dissatisfaction.

Read our well-chosen tips, and you’re sure to find the right product that would serve the purposes for which you are buying it.

1. Features:

Source: ricardoeletro.com.br

Spend some time studying the features of the blender you have in your primary selection list.

You should check for:

Power:

Source: miranella.com

According to your needs, the requirements of power may very well vary.

For general mixing and whipping, you don’t need more than 300W. But when it comes to crushing ice, no less than 500W is going to serve your needs.

Speed Control Feature:

Source: pinterest.com

Different types of blending and mixing need different speeds. Your desired blender should have a variable speed control system.

Easy Assembly of Component Parts for Cleaning

Source: thebestsmoothieblender.net

Blenders always need cleaning. For a deep clean, you need to dismantle it frequently. So, the system of assembly should be smart to assemble and easy to dismantle.

Easy locking system

Clip locking is always easier than screw locking. There are even smarter techniques in vogue nowadays.

Stability During Action

This is something that you cannot probably test unless you put it to work at least once.

Some cheap blenders cannot hold the smoothie and leak off through the fine temporary seam between the jug top and the lead when the blender is vehemently shaking.

The culprit is the rubber washer used between the lid and the jug top that is supposed to make the connection tight.

Additional Accessories

A couple of beakers, a handful of choppers, and some other accessories would make it a more reliable blender. Also, make sure that the spare parts and accessories are available. Check out Blenderbabes.com for more info about choosing the right blender.

Safety

Source: blendwithus.com

Blending is a watery job, and a short circuit would be just lethal. More use of plastic makes a blender safe as plastics are soft and great insulators.

2. Important Considerations

There are some essential things which must be considered before you buy the blender of your choice:

No Compromise on warranty

Source: blendersonline.com.au

Generally, unbranded products (products that are not manufactured by renowned companies) don’t offer any warranty. Some branded products, however, provide less warranty or partial warranty (i.e., they’d offer warranty for the blade but not for the motor).

There are lots of tricks like that through which they evade compensation for the parts.

The bottom line is, you should buy products with more warranty (no less than 6 months), and it should be a full warranty.

Customer Reviews and Ratings:

Source: shutterstock.com

Among millions of benefits that we derive from the internet, an important one is that for almost every product of renowned companies, you will find customers’ reviews and ratings.

Though some of them might be fake to promote a particular product, there are impartial and unbiased reviews and ratings that clearly state the pros and cons of the product with price comparison.

These are really helpful in deciding which one to buy.

Brand Name Speaks a Lot!

Source: digitaltrends.com

Yes, brand matters when considering standard and reliability. Brands that are new or struggling to come up usually offer low prices with alluring discounts or prizes. But in most of these cases, the quality is unreliable.

If you check the list of brands for a particular product, the top 5 or 8 are generally trustworthy.

Remember Price!

Source: macys.com

Needless to say, you need to be sure how many persons you’re going to blend for and how many features you need.

Costs vary mainly depending on two basic factors: size and number of features your preferred product offers.

If you need a smaller one, you also save electricity costs. Same way, if you purchase a simpler blender, you’re going to be able to use it for a more extended period.

Now the choice is yours.

For other considerations, you might like to visit this site.

3. Blender Parts

Source: bt.rozetka.com.ua

The Jug

Generally, the plastic jug is lighter than the glass jug. But plastic jugs get scratched easily and absorb odors, while glass jugs are heavy and prone to break easily and are more costly.

There is one solution: high-quality plastic. They are less costly than glass, while they bear the good qualities of glass and are free from most disadvantages of ordinary plastics.

Smaller Blending Cup

Some blenders come with a personal blending cup, which is small and with a lid. It can very well be used to take your smoothie out to enjoy it at the park or work.

The Extra Ice Crusher

Some brands offer an extra ice crusher. Others have all-rounder extra strong blades that work fine with smooth blending as well as ice crushing.

We recommend an extra ice crusher. It means assurance and reliability.

Grinding blade

Some blenders come with an extra grinding blade to grind dry items such as coffee beans or nuts.

Smart Jug Lids

There are some jug lids that allow you to add ingredients while others are already blending. Also, some jug lids incorporate a strainer that cleanly gets all the remaining lumps out when you pour.

For more information on what to consider, you might like this site.

Footing

The base part is no less critical. If the footing is not sturdy and stable enough, it tends to sometimes topple by itself and sometimes with a slight push.

Three good features of footing are it is wide in diameter, being heavy enough that enables it to be stable, and having something underneath that exclusively sticks to the table. Generally, some rubber bubbles or round washer-like layers under the footing do the job.

Final Words

It’s always wise to spend some time researching before you buy something rather than feeling the overwhelming despair afterward that it doesn’t serve you right. After all, the internet is full of information and guidelines.

At least one out of four or five is going to help you and save you from complaining and replacing and, at last, being compelled to plan for another one.

How to Litter Train a Stray Kitten

If you do not know how to do it, spend a little time reading our article to find out the answers.

We will show you how to teach your stray cat to use a litter box in a particular way. But first, you need to be patient as the training process will probably take you a long time.

Let’s get started!

How to Litter Train a Stray Kitten

Image source: webmd.com

Most kittens can learn from their mothers to use litter boxes at an early stage. But stray cats probably do not know the way to use litter boxes. If you want to train your cats to use the litter box, follow the tips below:

1. Choose an appropriate little box

  • Pick a big litter box

The reason why kittens pee and poop outside the litter box is that their boxes are not big enough. That plays a vital role if your pets are in the growing process. When your cats have a large litter box, they will have more room at their disposal.

Another important thing is that if you have a kitten or adult cat, you should choose a low-side box so that your pet can quickly go in and out of it.

  • Choose an uncovered or covered box

You know everything has its pros and cons. So it would help if you chose uncovered or covered litter boxes based on your pet’s taste.

We will list the advantages and disadvantages of the lidded box for your considerations:

Pros: A covered litter box helps hinder dogs from getting access to the box.

Cons: It can cause difficulties for your big cat to turn around or dig inside the litter box.

  • Have other alternatives

You should have other litter boxes if your house space is available. It is quite helpful in case your pet is still young and in the learning process, or you have two or more cats.

  • Place the box in suitable locations

Image source: aspca.org

A cat naturally buries its waste; however, if you put its litter box in an unsuitable position, she/he probably seek other places to relieve herself/himself. Here are some tips for you to choose the right place for putting litter boxes.

Please do not put the box near the place you feed your cat because it can make your pet anxious as well as increase the likelihood it will have wrong eliminations.

Give the cat some peace as most cats prefer an undisturbed and quiet place when eliminating wastes.

2. Maintaining litter boxes

Image source: pinterest.com
  • Pick the right litter

Cats usually like clumping litter because it is easy for cats to walk on and bury the scraps.

You can check the list of the best litter for kittens at catthink.com.

  • Use an appropriate deal of litter

If you abuse litter, it will make a mess since some litter can be spilled out when your cats bury the wastes. On the other hand, using too little litter can cause your cats to have the inadequate elimination of wastes. It is recommended to fill the box with around 2 inches at first. Then you can increase the depth to 4 inches if your cats do not satisfy.

  • Keep the box clean

Image source: thegrommet.comx

If your cat is still young and is learning how to use a litter box, you should leave all wastes in the box, which helps to remind your cat to eliminate wastes in the right place.

It is recommended to scoop twice every day to keep the box clean.

Use gentle soap with warm water to wash the box. You should not use harsh chemicals because you can leave unexpected residual chemicals and smells which are harmful to your cats and hinder them from the box.

3. Train cat to use little boxes

  • Learn the schedule of your cats

It will help you know exactly when your cats will relieve themselves. Therefore, you can easily direct them to use a litter box.

Play with cats near the litter box. As most cats need to relieve after running or playing, you can play with them near the box, so they are more likely to use it to leave their wastes.

  • Teach cats what to do

In case your cats do not learn to use their litter boxes from their mothers, you need to teach stray cats how to use them. For instance, you can carry them to litter boxes when they intend to relieve themselves and guide them the way to dig inside the box.

You can use your fingers to scrape litter aside until your cat knows. If they already know how to pee or poop in their litter boxes but cannot bury the wastes yet, you should use fingers again to scoop litter over the scraps. They will gradually imitate your acts.

4. Address wrong elimination

Imaeg source: cat.reviews
  • DO NOT yell at your cats

As your cats do not deliberately leave their wastes in the wrong places, you should not scold or yell at your cats. It only makes them afraid of you, and you cannot solve the problems.

  • Put wastes in the box

Should your cats eliminate outside the box, you’d better-put scraps in the box to remind your cats to relieve themselves by using their litter box.

  • Move water and food to a problem area

In case your cats still eliminate outside the box and have a specific wrong location, you can move the water and food to the spot where they remain eliminating. They can have a hardwired temptation to avoid leaving wastes around water and food. Therefore, they can stop relieving themselves outside the litter box.

Final Thoughts

That’s all that we want to share with you about how to litter box train a stray kitten.

We hope our article is helpful to you in teaching your little kittens to eliminate in the right place.

So what do you think now? Is it easy or hard? Leave your story in the comment section below.

Thank you for reading!

How to Clean Air Ducts

Learning how to clean your air ducts on your own can save you a lot of money since professional duct cleaners can charge a lot for it. It is not a common house chore as there is no need to do this as often, but it’s still a good skill to be familiar with.

Why should you be cleaning your air ducts?

There are many reasons to clean the air ducts in your house. If the air ducts stay clean, the heating system in your home would probably last longer since there are less dust and dirt to wear out its components. Your home will also be dust-free longer and the air inside will be much cleaner. For those with allergies, this is a big win.

You probably don’t have a high-powered vacuum system with hundred feet hoses, mostly because there’s no need to spend money on a thing that you will be used only once or twice a year. So follow this quick guide on how to clean your air ducts yourself. There are many different air duct designs, all with different angles and corners. This means there will be parts you probably won’t be able to reach, so keep in mind that you won’t do as good a job as a professional normally would. If you are thinking about skipping all the hassle and want to get the ducts in your house clean, don’t think twice and hire a professional such as Better Air.

Things you would need to clean your air ducts

Img source: aardvarkair.com
  • Quality brush. You would need a strong brush with stiff hair for scrubbing.
  • A decent consumer vacuum with the necessary attachments would probably do the job.
  • To reach into the air ducts you will need to unscrew the grates first, so get a bunch of screwdrivers and see which one would fit.
  • Towels or paper towels. You will use this to cover up all the other air duct grates while you are cleaning the duct. If you don’t do this, dust will start flying into all the other rooms.

Air duct cleaning

  1. Cover the air duct grates with the before mentioned paper towels to avoid bringing dust into every room
  2. Make sure you have your fan on while cleaning to keep the dust moving through the duct instead of stacking in one place.
  3. You can start loosening the dust in the ducts by lightly tapping on the duct with the brush. This will break up any dust that has accumulated in one spot.
  4. Use the vacuum to start cleaning up any dust that’s moving through the ducts and the spots where it’s been gathering.
  5. Make sure to vacuum and then clean all the grates in your home, because they certainly have also been clogged with some dust.
  6. Turn off the power to the blower unit and clean the dust on and around the fan
  7. Finally, change the furnace filter since this will considerably reduce your dust build up in your ducts and in your home

Well, that’s about it, if you follow through this quick guide, then you have managed to clean your air ducts and have brought cleaner in your home.

Guide To Buy A Wireless Vacuum Cleaner, What Should You Know?

A Shark cordless vacuum is very important for any home because this tool allows you to clean the hidden debris that accumulates every day in your house. Having a vacuum cleaner is always good since this way you can ensure the proper cleaning of space in which you and your family live.

There are many factors that can influence the quality of a Shark stick vacuum. So, it is very important that before buying one of these devices you have knowledge about what are the characteristics that you should consider when looking for a vacuum cleaner. The first thing you should know is the fact that there are a lot of models in the market.

Vacuums like the Shark ION X40 are very popular because it has a reasonable price and offers superb quality. However, this vacuum has a much simpler design compared to the Shark ION F80. This model is one of the latest additions by the company and can be used as a normal or as a hand vacuum cleaner.

source: bestbuy.com

So the question is: what should I take into account when performing a Shark ION X40 and F80 comparison? Below are the characteristics that must be taken into account when buying one of these:

  • The most important thing to consider the cost of the vacuum cleaner and the money that is intended to be spent on this device. Each model has its own tools and offers its own benefits.
  • Does the vacuum have a rigid rod or an adjustable rod? Those vacuum cleaners with an adjustable rod are usually ideal for reaching hidden places in the home where dirt accumulates. With rigid rods, this is not possible.
  • The vacuum cleaner can be disassembled? One of the most common features in current vacuum cleaners is that they can be disassembled to create a much smaller hand vacuum for more complex cleaning rooms.

If you want to compare Shark ION X40 and F80, then it is necessary that you take into account these characteristics. The only difference between these two models lies in their price since both offer a high quality when it comes to cleaning.

Where Can You Buy One Of These?

source: direct.sharkclean.com

If you want to obtain one of these models you can visit virtual stores such as Amazon or the website of the company responsible for its manufacture. Finding these is not the problem; the problem is choosing which is the best for your needs. There are so many models of vacuum cleaners that it will surely be a complex task to make a quick choice.

The most advisable for these cases is to carry out an investigation on the characteristics that each model of the vacuum cleaner has so that you have clear information about what are the benefits that can be obtained. On the internet you can check HomeDorks and find a lot of information on the subject, finding pages where you can know the characteristics of the most popular vacuum cleaners in the market, as well as find comparisons of models like the Shark IONFlex IF251 vs. F80. If you have correct information on the subject, then you likely to choose the vacuum that best suits your needs.